人人妻人人澡人人爽久久AV ,亚洲中文字幕无码久久2017,XXXX日本少妇做受,俄罗斯真人性做爰

機床的主要特點 Main Characteristics

?機床床身采用鑄件澆鑄，剛性好，結構穩，變形小;

?機床采用床頭箱固定在進給滑板上工件進給，砂輪作往復結構布局;

?工件進給滑板及砂輪工作臺滑板采用高剛度十字交叉滾珠導軌;工件進給由伺服電機經聯軸器帶動高精度滾珠絲桿副來實現，進給和補償為同一傳動鏈，結構緊湊，精度高;

?工件主軸采用整體套筒式主軸，剛性好，主軸軸承采用高精度成對軸承，回轉精度高，穩定性好，主軸回轉變采用頻無級調速;采用超寬的工作臺和進給滑板結構，提高機床的整體剛性;機床配有防水全封閉罩殼，觀察窗保證長期觀察清晰，耐油污并保證砂輪破碎后不飛濺傷人;

?機床采用后置電器箱和前置回轉式操作臺以及獨立的循環啟動按鈕。電箱帶熱交換器，以及確保在高溫期間正常運行;

?機床可據加工零件設計制作專用夾具;

?機床采用日本三菱PLC控制系統、伺服單元及主要電器控制元件，用戶如有特殊要求可選用其他控制系統;

?The machine bed adopts the casting piece with the features of good rigidityand small deformation.

?The headstock is fixed on the feed slide for achieving work feed. The gri.wheel reciprocation is also used.

?Work feed guideway and gri. wheel worktable guidaway adopt the crossedroller type.

?Work feed can be performed by the servo motor through the coupling viahigh-precision ball leadscrew pair.

?Table reciprocation movement can be achieved by mechanical oscillationwhich its reci. speed is adjusted by the freq.-conversion speed regulator.Cartridge-type work spindle is used. The high-precision matched spindlebearing is adopted with the features of high rotating accuracy and goodreliability.

?Super-wide worktable and feed slide are used , thus improving good rigidity.lt's totally enclosed with guards to prevent swarfs from splashing.

?The rear-mounted electrical cabinet and front-mounted control cabinet arealso used.The heat-exchanger in the electrical cabinet is also provided.

?The special fixture can also be designed ncoording to the machined workparts.

?Mitsubishi PLC control system a& servo unit is adopted. Other controlsystem can also be selected for special order.